氣過濾器
燃?xì)膺^濾器廣泛用于冶金、化工、石油、造紙、醫藥、食品、采礦、電力、城市、家庭等用氣領域。燃?xì)膺^濾器是輸送介質管道上不可缺少的一種裝置，通常安裝在減壓閥、泄壓閥、定位閥或其它設備的進口端，用來消除介質中的雜質，以保護閥門及設備的正常使用，減少設備維護費用。
Gas filters are widely used in the fields of metallurgy, chemical industry, petroleum, paper making, medicine, food, mining, electric power, city, family and so on. Gas filter is an indispensable device in medium pipeline. It is usually installed at the inlet of pressure relief valve, pressure relief valve, positioning valve or other equipment to eliminate impurities in the medium, so as to protect the normal use of valves and equipment and reduce equipment maintenance costs.
當流體進入置有濾芯的過濾器后，其雜質被濾芯阻擋，而清潔的濾氣則由過濾器出口排出，當需要清洗時，只要把濾筒拆開，將濾芯取出，清洗后重新裝入即可，因此，燃?xì)膺^濾器使用維護極為方便。
When the fluid enters the filter with a filter element, its impurities are blocked by the filter element, while the clean filter gas is discharged from the outlet of the filter. When cleaning is needed, as long as the filter cylinder is dismantled, the filter element is taken out and re-loaded after cleaning. Therefore, the use and maintenance of the gas filter is very convenient.
燃?xì)膺^濾器主要性能
堅固的材質
有效的過濾
緊密的結構
輕松的保養
燃?xì)膺^濾器在進口和出口均裝有測壓點（微型家庭用除外）
燃?xì)膺^濾器產品參數
最大允許壓力：1bar、2bar、6bar、10bar、16bar、25bar、40bar
燃?xì)膺^濾器適用介質：城市煤氣、天然氣、液化石油氣、人工煤氣等多種無腐蝕性氣體
燃?xì)膺^濾器安裝注意事項
燃?xì)膺^濾器通常應安裝在調壓器之前，且必須根據其上標明的氣體流動方向安裝；
燃?xì)膺^濾器是由可洗的合成材料組成，安裝過濾器要注意蓋子能夠方便地打開，便于清潔和檢查；
燃?xì)膺^濾器可以安裝在水平和垂直的管道上，不要把過濾器安裝在不穩固的基礎上；
在檢修之前，請您務必確認燃?xì)膺^濾器內沒有燃?xì)庵，將過濾網卸下，用肥皂水清洗，然后自然風干，再重新安裝。
Gas filters should usually be installed before the regulator, and must be installed according to the direction of gas flow indicated on the regulator.
燃?xì)膺^濾器是由可洗的合成材料組成，安裝過濾器要注意蓋子能夠方便地打開，便于清潔和檢查；
Gas filters are made of washable synthetic materials. When installing filters, attention should be paid to the fact that the cap can be opened conveniently for cleaning and inspection.
燃?xì)膺^濾器可以安裝在水平和垂直的管道上，不要把過濾器安裝在不穩固的基礎上；
Gas filters can be installed in horizontal and vertical pipelines, and do not install filters on unstable foundations.
在檢修之前，請您務必確認燃?xì)膺^濾器內沒有燃?xì)庵，將過濾網卸下，用肥皂水清洗，然后自然風干，再重新安裝。
Before repairing, please make sure that there is no gas in the gas filter. After that, remove the filter screen, clean it with soapy water, then air-dry it naturally and reinstall it.
燃?xì)膺^濾器溫馨提示
安裝完畢后，必須做密封性檢驗。
通氣時，瞬間氣量不宜過大。
燃?xì)膺^濾器濾芯用微量的洗滌劑加清水清洗潔凈即可。
選型需提供的參數：介質、最大使用壓力與口徑。
燃?xì)膺^濾器保養和維護
-
日常維護、保養
1)經常保持設各表面清潔。
2)設備停車時，應及時按規定對快開盲板 (法蘭蓋)的各個轉動進行潤滑，開閉部位的絲杠，應涂潤滑油脂. 其它部位也盡量涂潤滑油脂. 對于無法涂潤滑油脂的部位，可注 10#或20#機油。
2. 運行時的維護、保養
1)建議由操作者負責設備平時的維護保養.
2)經常保持設備表面清潔。
3)隨時監測差壓計讀數，當使用壓差達到0.O2Mpa時，應沖洗濾芯。
3. 檢驗周期
1)本設備的定期檢驗必須嚴格按照“容規”第六章的有關規定進行。
2)每年至少對本設備進行一次全面檢驗、設備壁厚的測雖，每兩年對設備的承壓焊縫進行無損檢測。所有的檢驗、檢測結果，應記入設備的技術擋案。
3)設備內部有壓力時. 不得進行任何維修。對于特殊情況下的維修. 必須嚴格遵守“容規”第 122條的規定進行。
4. 長期停放時的維修保養
1)本設備長期停放時. 應將設備內液體排凈。
2)關閉所有閥門。
3)將設備表面徹底清理干凈。
4)所有轉動部位涂防油脂。
5)用帆布將設各全部蓋上，防止塵垢沉積在設備表面
1. Daily maintenance
1)經常保持設各表面清潔。
1) Always keep the surfaces clean.
2)設備停車時，應及時按規定對快開盲板 (法蘭蓋)的各個轉動進行潤滑，開閉部位的絲杠，應涂潤滑油脂. 其它部位也盡量涂潤滑油脂. 對于無法涂潤滑油脂的部位，可注 10#或20#機油。
2) When the equipment stops, the rotation of the fast-opening blind plate (flange cover) should be lubricated in time according to the regulations. The screw in the opening and closing parts should be greased. The other parts should also be greased as far as possible. For the parts that cannot be greased, 10 or 20 oil can be injected.
2. 運行時的維護、保養
2. Runtime maintenance
1)建議由操作者負責設備平時的維護保養.
1) It is suggested that the operator should be responsible for the maintenance of the equipment in peacetime.
2)經常保持設備表面清潔。
2) Keep the equipment surface clean regularly.
3)隨時監測差壓計讀數，當使用壓差達到0.O2Mpa時，應沖洗濾芯。
3) Monitor the differential pressure meter readings at any time. When the differential pressure reaches 0.02Mpa, the filter cartridge should be flushed.
3. 檢驗周期
3. inspection cycle
1)本設備的定期檢驗必須嚴格按照“容規”第六章的有關規定進行。
1) The periodic inspection of the equipment must be carried out in strict accordance with the relevant provisions of Chapter VI of the "Compliance Regulations".
2)每年至少對本設備進行一次全面檢驗、設備壁厚的測雖，每兩年對設備的承壓焊縫進行無損檢測。所有的檢驗、檢測結果，應記入設備的技術擋案。
2) Perform a comprehensive inspection of the equipment at least once a year, and measure the wall thickness of the equipment. Nondestructive testing of the pressure welds of the equipment is carried out every two years. All inspection and test results shall be recorded in the technical files of the equipment.
3)設備內部有壓力時. 不得進行任何維修。對于特殊情況下的維修. 必須嚴格遵守“容規”第 122條的規定進行。
3) When there is pressure inside the equipment, no maintenance is allowed. Maintenance under special circumstances must be carried out in strict compliance with the provisions of Article 122 of the "Compliance Regulations".
4. 長期停放時的維修保養
4. Maintenance during long-term parking
1)本設備長期停放時. 應將設備內液體排凈。
1) When the equipment is parked for a long time, the liquid in the equipment should be discharged completely.
2)關閉所有閥門。
2) Close all valves.
3)將設備表面徹底清理干凈。
3) Clean the surface of the equipment thoroughly.
4)所有轉動部位涂防油脂。
4) All rotating parts are coated with grease.
5)用帆布將設各全部蓋上，防止塵垢沉積在設備表面
5) Cover all the parts with canvas to prevent dust deposition on the surface of equipment.
The T-type filter produced by Zhejiang Shuangqing（雙慶） Valve Manufacturing Co., Ltd. is a small equipment for removing a small amount of solid particles in the liquid, which can protect the normal operation of the equipment. When the fluid enters the filter cartridge with a certain size filter screen, its impurities are blocked, while the clean filtrate is discharged from the outlet of the filter. When cleaning is needed, it is only necessary to remove the impurities from the filter. Removable filter cartridge can be taken out and re-loaded after treatment. Therefore, it is very convenient to use and maintain. Our company specializes in the production of filters, including: (blue filter, T filter, y filter, U filter, backwash filter, fully automatic cleaning filter, fully automatic backwash filter, magnetic filter, taper filter, temporary filter, etc.), decontaminator, fire arrester, breathing valve, viewing mirror, person. Holes and other series of products, but also in accordance with customer requirements to undertake special non-standard products. Products are widely used in chemical, petroleum, light industry, food, medicine, environmental protection, power, metallurgy, textile, food, natural gas and other industries.
雙慶始終以科技創新，一切為滿足用戶的經營理念，以質量是企業的生命，誠信是企業的根本，客戶是企業的支柱，管理是企業的靈魂的經營之道，以實事求是的精神，竭誠為用戶提供優質的產品和更加完善的服務。在多年的生產中積累了豐富的經驗，擁有優良的機械加工設備及檢測手段，同時也有較強的自組開發能力，雙慶也形成一套集研發,生產，銷售及售后服務于一體的科學管理體系，產品遠銷全國各地區，深受客戶的青睞。
Shuangqing always takes scientific and technological innovation, all in order to meet the user's business philosophy, quality is the life of the enterprise, integrity is the foundation of the enterprise, customers are the pillar of the enterprise, management is the soul of the enterprise's business approach, with the spirit of seeking truth from facts, wholeheartedly provide users with high-quality products and better services. Over the years, we have accumulated abundant experience in production, with excellent mechanical processing equipment and testing means, and also strong self-development ability. Shuangqing has also formed a scientific management system integrating R&D, production, sales and after-sales service. The products are exported to all parts of the country and are well received by customers.
在線咨詢 
在線客服：0571-87774297
